The Original Blended Natural Fiber Pad that gives a “wet look” shine. Gorilla® is made with a blend of natural fiber and polyester. This blend uses properties of both fibers to create the most unique and respected floor pad in the world. To clean it, just brush away dried wax with its die cut center. It will not glaze over.

A light abrasive pad for spray buffing to a satin gloss. The fibers are more open to help keep the pad from glazing over.

A mildly abrasive dry buffing pad for slow speed floor machines. The Tan Buff pad will buff away light soil and level scratches for a soft luster.

A non-abrasive dry polishing pad for slow speed floor machines. The White Polish pad will level scratches for a high luster.

A non-abrasive dry polishing pad for slow speed floor machines. The White Polish pad will level scratches for a high luster.

As a Maroon deep scrub & recoat pad, The Redwood® can be used wet or dry to remove multiple layers of finish prior to recoating. The Redwood® is a 3/8” pad and should always be used with a 1” ETC pad to drive it.

A medium abrasive pad for wet scrubbing. This pad will remove embedded soil and black marks found in heavy traffic areas without stripping your finish to the tile.

A medium abrasive pad for spray cleaning. To clean a lightly soiled floor, use this pad with a spray solution. This process will remove a small amount of finish. Can be used to wet scrub.

Monster® is designed with natural abrasive action to clean black marks and soil. The top layer of finish, with its embedded dirt, is removed and the remaining finish is brought to a high sheen. Monster®’s “clean and shine” characteristics reduce the need for stripping.

A light abrasive pad for light cleaning. The fibers are more open to help keep the pad from glazing over. Can be used under automatic scrubber machines for nightly cleaning schedules.

The Original Blended Natural Fiber Pad that gives a “wet look” shine. Gorilla® is made with a blend of natural fiber and polyester. This blend uses properties of both fibers to create the most unique and respected floor pad in the world. To clean it, just brush away dried wax with its die cut center. It will not glaze over.

A lighter blend of natural and synthetic fiber than Gorilla®. Designed for more frequent use than Gorilla®, with highly responsive finishes.

This pad is designed for a burnishing schedule that calls for use 3 to 4 nights per week. It produces a very bright “wet look” shine with soft to medium finishes. Use Aqua Plus® under electric, battery or propane machines with ultra high speeds of 1500 to 3000rpm. Aqua Plus® is made from durable high-tech resins and fibers plus a light sprinkle of natural fiber.

A special blend of synthetic and natural fibers in a pad designed for nightly burnishing. This pad will give you an exceptional gloss.

A synthetic fiber pad designed for burnishing newly developed finishes. This pad will give you a very high gloss.

The lightest blend of natural fibers in a synthetic fiber pad for those who use a soft finish that requires nightly burnishing. This pad is designed to give you the same high gloss “wet look” shine that big brother Gorilla® is known for.

A totally synthetic, non-aggressive pad designed for burnishing and polishing with a high speed or ultra high speed floor machine. The rubberized coating creates friction needed to repair softer finishes while removing black marks. This pad will create a high gloss shine.

Use to help cure freshly laid finish as soon as it dries. Perfect for overnight recoats before holiday traffic. It’s super soft to keep from pulling the finish up. It’s strong to stand up under propane, cord electric or battery floor machines, and it’s flexible to keep from burning uneven floors.

This is an ultra-high speed (2000rpm and up) burnishing and spray buffing floor pad of special design. So special that it’s patented. It is constructed of two 1/2″ floor pads bonded to a stabilizing inner strata. The inner strata stops the elongation and resulting destruction of the pad due to centrifugal force.

The 2001® line of pads includes:

• 2001® Gorilla®
• 2001® Jaguar®
• 2001® Aqua Plus®
• 2001® Blue Jay®
• 2001® Gorilla Lite®
• 2001® Soft White®
• 2001® Superspeed Rubberized®

2001® pads will give you the “wet look” shine, ease of cleaning and all of the other excellent qualities of these floor pads. 2001® pads also outlast normal pads on ultra high speed floor machines more than 3 to 1.

A very aggressive stripping pad. It is designed to be used to wet strip a floor. High quality abrasive and materials make this an efficient tool for complete floor finish removal.

An aggressive pad designed for dry stripping floor finish. Its fibers, throughout the pad, are coated with high quality abrasives for a fast, efficient job.

Boss Hawg® is a super stripping pad for completing your natural fiber system of floor maintenance. This pad has the abrasive character to dry strip a floor or work equally well when you wet strip. Boss Hawg® was designed to work quickly and thoroughly, whichever system (wet or dry) you use.

The Razorback® pad is a high performance stripping pad that works very aggressively in problem areas that need to be stripped of all finish.

The Diamondback® pad is our Extreme Stripping Pad designed with an open wave construction that enables it to hold more load without clogging in heavy build-up situations.

Most aggressive. For damaged floors or use after grinding. HD removal of scratches and discoloration.

Very aggressive. For damaged floors or use after grinding. HD removal of scratches and discoloration. Leaves satin or matte finish.

Intermediate step or first step in floors not maintained. Cleans surface. Removes small scratches. Leaves a slightly reflective finish.

For maintained floors. Cleans and prepares floor for high polish. Removes fine scratches. Conditions stone and concrete floors for final polishing. Can be regular maintenance pad.

Normal daily maintenance pad. Produces and maintains a “wet look” shine. Can be used on concrete, stone, terrazzo, tile and VCT.

Produces and maintains a “wet look” shine. Can be used on concrete, stone, terrazzo, tile and VCT.

Produces and maintains a “wet look” shine. Can be used on concrete, stone, terrazzo, tile and VCT.

90-degree heat bonds silicate coatings. Uses unique heat shield. Two sided for twice the life! Blend of natural and synthetic fibers. No color transfer from added dyes. Burnish all types of concrete densifiers, hardeners and sealers. Very high gloss-meter readings due to the heat.

A multiple speed floor pad specially designed for concrete. It’s constructed as a one-inch premium concrete floor pad with abrasives and aggressive bond containing no dyes to transfer to your floor. Armadillo® pads will give you the “polished look” of a burnishing pad while cleaning and removing surface dirt and scratches over time using an autoscrubber.